HVAC Tips: Why You Need To Check The Site, Size, And Installer Of Your Air Conditioning Unit
In the coming summer season, a good and properly working air conditioning system is necessary to beat the warm and humid weather. Air conditioning is one of the main functions and services of an HVAC (heating, ventilation, and air conditioning) system. Fundamentally, they provide cool and refreshing air, as well as convenience, and comfort during the hot season.
Because of these essential functions, it is only important to make sure that your air conditioning unit is properly working and in good condition. If you think yours has a problem, you may need help from a full service HVAC contractor to determine your system’s problem.
If you’re planning to have a new air conditioning system, you’ll need to examine the site of the system, its size, and the installer of the unit. Stay tuned as to why you need to do so, as every detail will be discussed further in this article.
Why Do You Need To Check The Site Of Your Air Conditioning Unit?
As mentioned above, having a working air conditioner is a must during summer. However, if it’s not providing you any cold air like before, there might be a problem with where your air conditioning unit is located. It might be installed on places where the unit may fail to function and work properly, such as:
- Hotter Parts Of The House
Since the main function of an AC is to provide cool air during the hot season, it makes sense if you have it installed in the warm areas of your home. However, this is a bad idea for your unit. Placing them in the hotter sections of your home would require them to work harder to make sure that the surroundings are filled with cool air. This would overwork the machine and ruin your unit.
In addition, your electric bills might get affected as well due to excessive power use. It’s best to have your unit installed in slightly distant and shady places. This will effectively cool the hot areas of your home and not overwork your unit.
- Hidden Areas
Placing the air conditioning unit in shady areas doesn’t mean installing it in hidden places, such as the back of the couch. Placing it in such locations would only prevent the unit from functioning properly due to limited airflow. Not only that, but it can also mess with your AC ventilation system.
Also, you run the risk of having your unit clogged with leaves and twigs. This could happen if the AC is installed behind the house plants. Therefore, if you don’t want to interrupt the function of your AC, you must avoid putting them in hidden areas and instead, place them in areas with maximized airflow and ventilation.
- Areas Within Fire Hazards
As much as possible, never place your AC unit in places where fire accidents are inevitable, such as the kitchen. Not only can this damage your AC unit, but also pose danger to your home. This could lead to the occurrence and spread of electrical fire due to circuit problems.
Therefore, when installing a unit, make sure that it is not adjacent or near any fire hazards to prevent any accidents from happening.
- Areas Near The Trash Can
If you install your AC near the trash can, expect your house to smell bad. Why? Because the role of an AC unit is to gather the air in its surroundings and breathe it out into cold air. That’s why it would not be wise to install it near the trash can or place the trash can near your unit. Doing so can prevent you from enjoying the fresh and cool air.
So, what you can do is install the unit away from the garbage bins or dispose of the garbage as soon as possible to prevent the smell from getting into your AC.
Why Do You Need To Check The Size Of Your Air Conditioning Unit?
Size may be the reason why your air conditioning unit is not functioning properly. When choosing an AC unit, it is important to determine the right size for your home. In AC units, bigger doesn’t always mean better. Here are the reasons why the right size matters:
- Level Of Comfort
If the air around your home feels hot and sultry even with the help of an air conditioning unit, it might be because your AC is too large for your home. Remember, your AC also works by absorbing the moisture from your home, and if it’s large, it means that it can absorb more vapor in the atmosphere, leaving your home dry and warm.
Also, if the unit is too large for your home, it may short-cycle, meaning it might turn on and off most of the time. This could make your home uncomfortably humid in the long run.
- Level Of Efficiency
Unlike large AC units that short-cycles, undersized units run non-stop to reach the temperature and cool your home. However, if your AC unit is appropriately sized, it will run and cool your room efficiently and effectively. This could also save you a lot of energy, resulting in lower electric bills, unlike large units that short-cycles.
- Unit Lifespan
Air conditioning units are a great investment, making your home comfy and cold during the intense summer heat. That’s why it is important to make sure that your unit is properly sized for your home, as units that short-cycle or run constantly are more likely to get damaged, resulting in high maintenance costs.
Why Do You Need To Check The Installer Of Your Air Conditioning Unit?
When installing a new air conditioning unit, you may want to ensure that your installers know what they’re doing. You wouldn’t want to have a non-working or defective unit. You also wouldn’t want to spend more money on additional repairs after your installer made a mistake. So, examine the company and check their credentials carefully. You may also want to check reviews from their previous clients.
Additionally, it might be best to monitor and ask some questions while they do the installation process. Also, before signing off anything, make sure that the system is properly working and all the lines are properly installed. Moreover, you should expect your installer to inspect for possible hazards before leaving. All of these steps should help you ensure the safety of using your air conditioning unit.
Final Words
Air conditioning units are among the most important home appliances you need to consider, especially when the summer season kicks in. It provides comfort and relaxation as it releases cool air. Because of this, it is only necessary to carefully inspect it to prevent any serious problems.
If your unit is not working like it used to, it might be because of some factors, such as its size, location, and its installer. So, if you want to make your air conditioning unit more efficient, energy-friendly, and budget-friendly, ensure to consider these factors when examining your unit.