6 Practical Tips to Keep Your Boiler in Optimal Performance
Keeping our boilers running in super-efficient conditions is a true challenge. Usually, boilers last for about 10-15 years. And, during these years, it goes from 100% output to 50% output.
That’s because of several problems that arise over time. These may include leaking and dripping, kettling (i.e., noises like that of a kettle), irregular hot water and heating, etcetera.
These issues arise due to intensive usage and simultaneous wear and tear. Hence, constant maintenance is necessary.
Here are six practical ways of keeping your boiler in optimal working condition:
-
Keep it Clean – Thoroughly
We often forget about our boilers after installing them. As they sit in a corner, doing their job noiselessly, we forget to cater to its cleaning needs, and this, in turn, could lead to huge problems.
Dust and debris may settle in the insides of your boilers. It can clog your system. So ensure that you clean it thoroughly, regularly. It’s preferable to clean the insides of the boiler every 15 days. Keep the external environment of your boiler clean as well. Remove any flammable materials such as paint cans, papers, and aerosol cans.
-
Lookout for Damages
As mentioned earlier, your boiler will likely undergo damages irrespective of all circumstances. Even if you maintain a proper cleaning routine, it will eventually develop problems and issues and die down in 10-15 years.
To slow the process (as much as you can), always keep a keen check on the body of the boiler. Check for any external damages. To keep a check on internal damages, observe the sounds and overall performance. If anything appears to be malfunctioning, address it right away.
-
Arrange Professional Yearly Inspection
Since you cannot be around your boiler 24/7, there are details and bits that you will miss out on overtime. Owing to this lacking on your end, your boiler may develop issues that you’re completely unaware of.
Hence, it’s best to schedule an annual check-up of the boiler. Hire an HVAC professional for this job. If the company that you’ve purchased the boiler from, promises follow-ups and warranties, you can reach out to them as well.
For example, check out Corgi HomePlan boiler system. The boiler not only comes with a top-notch mechanism but also a 10-year long warranty. During this, the company will assist you with monthly, annual, or occasional checkups as desired. Click here to see more about Corgi HomeHeat.
-
Take Care of Lubrication
Every mechanical object requires lubrication. That’s because repetitive movements give rise to friction, which causes wear and tear.
So, ensure that you lubricate the pumps and fans now and then. You may require 3-in-1 oil for this job. And you’ll find it conveniently from an online vendor or a machine repair shop.
-
Flush the Insides of the Boiler
Rust and debris often accumulate in the boiler. Hence, it’s very important to keep cleaning the insides with water.
To flush out the insides of the boiler, switch off the power connections. Open up the valves on radiators and connectors and allow some air to flow into the system. You might arrange a few buckets to collect any additional water that spills.
Now, use your garden hose to flush out accumulated dirt and debris. We recommend doing this at least once a year.
-
Check for Holes in Vents and Chimney
The vent and chimney are more prone to holes and broken connections than any other part of the boiler. That’s because they are more exposed to the external environment. You will only have to visually assess the chimney and vent to detect these.
Chimneys can also often fill up with deadly vapors. For that very reason, we recommend regular cleaning of this part of the boiler as well.
Final Thoughts
All in all, boilers are demanding additions to households. Even so, they are important all the same. Most of us cannot spend our winters without boilers.
Hence, we should adopt the best practices of maintaining boilers. Otherwise, we might be purchasing expensive new boilers now and then.