What Does a Plumbing Inspection Consist of?

A well-built exterior and interior of a building can impress nearly everyone. However, have you ever checked on what should be checked? 

Before getting the hold of your property, know that there are hidden elements that could only be surfaced from an inspection. From electrical to plumbing installations, everything must be on your inspection list! However, one aspect that you should be worried about is if the plumbing system is properly inspected. Trust me; you do not want to face the bitter consequences later... 

No building could ever survive without a proper plumbing system. So, before your living turns into a nightmare, know the following points of plumbing inspection and get rid of future complications once and for all! 

1- Inspection of pipes 

This should be your first step for the inspection of a plumbing system. Since it mostly consists of pipes, it should be made sure that they are properly attached. Quality is another factor that needs to be checked too. So, what are the critical notices taken during a pipe inspection? Let us find out below:

• The right size of the pipes. Larger or smaller pipes could result in a leakage of water.
• If the pipes are glued on properly, this is done to make sure pipes stay intact for a more extended period.
• Proper fitting of the pipes is a must. Imagine drainage pipes running through your room, sounds terrible right?
• An underground piping system has to be checked for rusting and loose pipes.
• Separation of pipes. To make sure that sewerage, hot and cold water have no chances of being mixed.

2- Is the water being used clean?

No, this is not about the quality of your local water supply. As crucial as it is, you might be astounded to know that the quality of your local water supply is being affected by your storage and piping systems! According to thoughtco, algae and bacterial growth can be a hazard in water storage containers. These quality risks could result in some deadly diseases that you would not want any worker, children, adult, or anyone to face! 

So, how could the risk be avoided? Surely if you are hiring professional inspectors of a plumbing system, they would use video cameras to insert in pipes and have a clearer look at their condition. They would also conduct multiple tests on the quality of water to check for biohazardous substances. 

However, I would still suggest you get your water storage cleaned once every two months later. 

3- Checking the basics 

Did you know that your plumbing system could always be at fault even when it is inserted correctly? This issue usually arises in old places. However, modern built homes are also not new to the following issues: 

• Dripping Faucets
• Sedimentation in taps
• Loose, or broken showerheads
• Clogged drains and taps

These issues must be checked for their full functionality. Dripping and leakage of water is a big NO! Check if the water flows down smoothly and if there is proper pressure in the taps. Turn on all taps to check the drainage system and if it even gives the slightest hint of being slow. 

4- Checking the Water Meters and Valves 

Again, this step is crucial in making sure that no water is being wasted at any cost! Water meters and main supply valves are installed in every building. So, how must one inspect if they are of the right use? 

Firstly, you need to close the valve to your primary supply of water. This will close all possible ways of any supply of water. Hence, no tap should have even the slightest bit of pressure of water. Secondly, you must close all the faucets. The next step is to check if the water meter is turning. 

If the above steps are indicating problems, you must call a professional to have a look. If you don’t know who you should call, just Google best plumbers near me, a list of results will be there in a few nanoseconds.

5- Check Under sinks

This is a simple check, look for water coming from pipes under the sink. Check valves to make sure they are working and not leaking. Make sure the pee trap is not clogged and all the fittings are tight. This is a common area to find leaks. It's very easy to bump pipes and cause them to leak. If you do find areas that need repairs, check this site for the best plumbing products to complete your plumbing repairs.

Final Thoughts

By this point, what you should have learned is that, before a legal house inspector strips you off your basic needs, or before you find yourself helpless, it’s better to take immediate action! So, ring a bell to a professional or do it yourself, plumbing inspection should be on the top of your house maintenance list! Did you find this article helpful? Tell us in the comments section below! 

Author Bio:
About Michelle Joe: Michelle Joe is a blogger by choice. She loves to discover the world around her. She likes to share her discoveries, experiences, and express herself through her blogs. You can find her on Twitter, LinkedIn, Facebook